intelliGAUGE PGT23.100/160
Pressure Transmitter with analog display,
bourdon tube measuring system, stainless steel
Specifications according to data sheet: PV 12.04
PGT23.100+892.44
Output signal: 4 ... 20 mA, 2-wire
Explosion protection: IECEx, ATEX type of protection ia with device category 2G and 2D
Nominal size: 100
Scale range: 0...1 MPa
Process connection: Diaphragm Seal
Connection location: lower mount
Liquid Damping (case filling): with
Case: solid front design EN837 "S3"
Electrical connection: L-Plug DIN EN 175201-804 6-pin + PE sidewise
Pressure Gauge Standard: International (standard Europe)
Accuracy class: class 1.0
Overpressure safe: standard
Window: laminated safety glass
Case material: Stainless steel 1.4301
Case surface: bare
Case filling fluid: Silicon oil M50
Material pressure element: Measuring System 316L
Manufacturer logo: *WIKA*
serial number on dial: Serial number *...*
Diaphragm seal system with 1 diaphragm seal
Assembly specification High-Side: Direct assembly
System fill fluid: KN 92 Medicinal white mineral oil; for pharmaceutical and food applications; FDA, USP, EP
Process temperature min.: + 10°C
Process temperature max.: + 80°C; for sterilisation (SIP) max. + 130°C
Ambient temperature pressure meas. min: + 10°C
Ambient temperature pressure meas. max: + 40°C
Diaphragm seal for pharmaceutical, biochemical and
food industry
Specifications according to data sheet: DS 99.40
Diaphragm seal: Model 990.18
Process connection type: Screw connection following DIN 11851
Process connection specifikation: Grooved union nut
Process connection: DN 40 (pipe dimensions 41.0 x 1.5)
pipe standard: Pipe dimensions per DIN 11850 row 2
Upper body material / main body material: Stainless steel 1.4435 (316L); UNS S31603
Diaphragm material: Stainless steel 1.4435 (316L); UNS S31603
Surface roughness wetted parts, welding seam excluded: Ra ≤ 0,76 µm (Ra 0.30 µin.) according to ASME BPE SF3
Label: WIKA standard without / with Tag-number
采集并显示过程值
传送过程值至控制室，传输信号为4 ... 20 mA、0 ... 20 mA和0 ... 10 V
本地模拟显示，易于读取且无需外部电源
安全应用
PGT23型压力表符合所有相关标准和规范的安全要求，完全可用于现场测量高压容器的工作压力，并可通过机械方式直接显示测量值，无需额外进行测量。
PGT23型压力表基于23x.30型安全模型而制造，是一款高质量的不锈钢压力表，标准尺寸为100或160mm。此外，该型号压力表的设计符合EN837-1标准。
在线业务
西安秦控商贸有限公司
客服QQ:1826994033 3098752790 2252397649
